Techfrost JOF ONE Owner's Manual page 12

2. Keep the DOWN key pressed for 1 second. The display will show the first available label.
3. Press and release the UP key or the DOWN key to select "Pb4."
4. Press and release the BLAST CHILLING. The display will read the temperature of the condenser.
To leave the procedure, operate in the following way:
5. Press and release the BLAST CHILLING key or do not operate for 15 seconds. The display will again
show "Pb4."
6. Press and to release the key UP or the key DOWN until the exhibits the suitable state from paragraph 8iic,
"the display
g) Manual defrosting starting
Please operate in the following way:
1. Make sure that a maintenance cycle is in progress.
2. Make sure the keyboard is not jammed and that a procedure is not in progress.
3. Keep the UP key pressed for 4 seconds. The LED
If the temperature of the evaporator upon starting the defrosting cycle, is not above that established with the
parameter d2, the cycle will not be activated. If the parameter P4 is set to 1, the defrosting cycle won't begin.
h) Keyboard Block/unblock
To stop the keyboard, please operate in the following way:
1. Please make sure a procedure is not in progress.
2. Please keep the DOWN and the START / STOP key pressed for 1 second. The display will read "Loc"
for 1 second.
If the keyboard is jammed, the following operations won't be allowed:












Distributed By:
Device switching on/off
Cell temperature display (per paragraph 8iid)
Evaporator temperature display
Condenser temperature display
Manual defrosting starting
Operation cycle start/stop
Lighting of the UV light for the cycle of sterilization
Alarms HACCP information display
Alarms HACCP information cancellation
Compressor working hours display
Compressor working hours cancellation
Formulation of the day and real time.
will switch on.
Street:5C Wendy Ct. Greensboro, NC 27409▪Mailing: PO Box 18542,
Greensboro, NC 27419▪P:336-856-2919▪F:336-217-8838
Email:Sales@AdvancedGourmet.com▪Web:www.AdvancedGourmet.com
P a g e | 12