Waste Disposal And Environmental Protection; Replacement Parts/Accessories - FLORABEST FKS 2200 E3 Translation Of The Original Instructions

The blade (4) has to be reversed regularly
after a working time of approximately 10
hours in order to ensure even wear.
1. Switch off the saw and pull out
the power plug (18).
2. Remove the sprocket chain wheel
covering (15), the saw chain (5)
and the chain bar (4).
3. Put the sword (4) front and rotate
it on the back. Loosen the fixation
screw (28) and remove the
ing plate
4. Attach the
with the fixing screw (28) from
the other side to the sword (4).
This, make sure that the clamping
screw bolt (29) is down. The
round nose (24a) the clamping
screw sprocket must point in the
direction.
F
5. Mount chain bar (4), chainsaw
(5) and sprocket chain wheel
covering (15) and tighten the
chainsaw.

Replacement parts/Accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone (see
"Service-Center" Page 52). Please have the order number mentioned below
Oil filler cap ..........................................................................................9110 1937
Saw chain Oregon 91P057X ..................................................................3009 1570
Saw chain Oregon 91VXL .......................................................................3009 1598
Chain bar .............................................................................................3010 0420
Bio chain oil 1 liter .................................................................................3023 0001
Bio chain oil 5 liter .................................................................................3023 0002
The Oregon replacement saw chain is to be used only in conjunc-
tion with the associated Oregon blade and the electric chainsaw
approved for this. There is a risk of injury.
tension-
(24).
tensioning plate (24)
www.grizzly-service.eu
Waste disposal and
environmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in an
environmentally correct manner - bring it to
a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Empty the oil tank carefully and hand in
your electric chainsaw at a disposal center.
The plastic and metal parts employed can
be separated out and thus recycled use
can be implemented. Ask our Service-
Center for details.
GB
ready.
49