Documentation Changelog - Libelium waspmote plug & sense Technical Manual

29. Documentation Changelog

From v5.7 to v5.8:
• It is noted that the 4 black mounting feet come already screwed and in vertical position
From v5.6 to v5.7:
• References to the new LoRaWAN module
• Smart Metering models were discontinued
From v5.5 to v5.6:
• References to the new Sigfox module
• Socket A was deleted from the Smart Water Plug & Sense! because it is no longer needed
From v5.4 to v5.5:
• References to the new Smart Water Ions line
• Dissolved ions sensors were moved from Smart Water to Smart Water Ions
From v5.3 to v5.4:
• References to the new Smart Enviroment PRO line
• The Dust sensor is discontinued in the Plug & Sense! ecosystem; now, the recommended option is the Particle Matter sensor
From v5.2 to v5.3:
• References to the new LoRa module
• Updated specs for WiFi, Encryption and Meshlium
From v5.1 to v5.2:
• Added references to the new GPRS+GPS module
From v5.0 to v5.1:
• Added references to the new Turbidity sensor for Smart Water
• Noted that Plug & Sense! can keep RTC time and be recharged in OFF position
• Deleted explanation about Plug & Sense! being powered by Waspmote v12 and not v11 (transition cycle completed)
• Replaced references to old Waspmote Plug & Sense! IDE
From v4.9 to v5.0:
• Added references to the new Bluetooth Low Energy module
From v4.8 to v4.9:
• Added references to the new Smart Water line
From v4.7 to v4.8:
• Added references to the new Calibrated Gas Sensor line
• Errata correction
-154-
Documentation Changelog
v5.8