Configuring Video Loss Alarm - HIKVISION DS-MP7504 User Manual

When an alarm is triggered, the local monitor displays the video image from the alarming channel configured for
full screen monitoring.

Audio Warning:
Trigger an audible beep when an alarm is detected.

Trigger Alarm Output:
Trigger an alarm output when an alarm is detected.
4) Click Apply to save the new settings and click OK to exit.
5. Click Apply to save the new settings and click OK to exit.

8.2.4 Configuring Video Loss Alarm

Purpose:
When the device cannot receive video signal from the front-end devices, the video loss alarm will be triggered. Linkage
actions including audible warning, alarm output, etc., can be set to handle it.
Steps:
1. Enter the Advanced Camera Settings interface.
Menu>Other Settings>Camera>Set (More Setting)
Mobile Digital Video Recorder User Manual
Figure 8. 9 Linkage Action of Tamper-proof
Figure 8. 10 Video Loss Settings
52