Getting Started; Manual Features - Sage BBL910 Instruction Booklet

opeRatINg yoUR Sage pRoDUCt opeRatINg yoUR Sage pRoDUCt

gettINg StaRteD

oN | oFF
The ON | OFF button powers the unit into
READY mode.
Ready mode
The blender will default to MANUAL.

MaNUaL FeatUReS

Speed control dial
There are 12 speed settings from STIR
through to MILL.
STIR mixes more delicate foods with a slow
stirring motion and light pausing to fold
ingredients together.
MILL is the fastest setting, and is ideal for
milling nuts, grains and seeds.
The blender is programmed to allow
manual speeds to run for 6 minutes before
automatically stopping.
paUSe | pLay
Pauses and holds the speed and timer for up
to 2 minutes. Press PAUSE | PLAY again
to resume.
Pause is also activated if the jug is removed
from base during use. Replace jug, and press
START to resume.
Repeat function
If the START button is pressed when
using the manual speed dial, or if the timer
finishes, the current speed setting will be
held for 2 minutes to allow a quick repeat of
the cycle.
Pressing the START button will re-start this
repeat cycle.
If you want to clear the previous speed from
the memory, press and hold the START
button for 2 seconds.
Sleep
After 2 minutes of inactivity, LCD powers
off, and the ON | OFF button flashes red.
After 5 minutes of inactivity, the blender
turns OFF completely. Press the ON | OFF
button to reactivate.
Count-up timer
If the timer isn't set, the blender timer
counts up in seconds as it blends. When
using the timer this way, the blender will
stop after 6 minutes, or you can cancel
blending manually.
Count-down timer
The alternative to running the blender in
count-up mode is to set the blending time
before starting.
9