Using The Windows Recovery Tools - HP 355 G2 Maintenance And Service Manual

Using the Windows recovery tools

To recover information you previously backed up:
1. Select Start > All Programs > Maintenance > Backup and Restore.
2.
Follow the on-screen instructions to recover your system settings, your computer (select models
only), or your files.
To recover your information using Startup Repair, follow these steps:
CAUTION:
All files you have created and any software installed on the computer are permanently removed. When
reformatting is complete, the recovery process restores the operating system, as well as the drivers,
software, and utilities from the backup used for recovery.
1.
If possible, back up all personal files.
2.
If possible, check for the presence of the Windows partition and the HP Recovery partition.
To check for the Windows partition, select Start > Computer.
To check for the HP Recovery partition, click Start, right-click Computer, click Manage, and
then click Disk Management.
NOTE:
You must recover your operating system and programs using the Windows 7 operating system
DVD and the Driver Recovery disc (both purchased separately) if the Windows partition and the
HP Recovery partition are not listed. For additional information, see
operating system DVD (purchased separately) on page
3. If the Windows partition and the HP Recovery partition are listed, restart the computer, and then
press
4. Select Startup Repair.
5. Follow the on-screen instructions.
NOTE:
For additional information on recovering information using the Windows tools, perform a
search for these topics in Help and Support.
132 Chapter 9 Backup and recovery
Using Startup Repair completely erases hard drive contents and reformats the hard drive.
If the HP Recovery partition has been deleted, the
f8 before the Windows operating system loads.
f11 restore option will not function.
Using a Windows 7
134.