Removal And Replacement Procedures For Authorized Service Provider Parts; Component Replacement Procedures; Top Cover - HP 355 G2 Maintenance And Service Manual

Hide thumbs Also See for 355 G2:
Table of Contents

Advertisement

6
Removal and replacement
procedures for Authorized Service
Provider parts
CAUTION:
provider. Accessing these parts can damage the computer or void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and
then follow the on-screen instructions.

Component replacement procedures

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
There are as many as 50 screws that must be removed, replaced, and/or loosened when servicing the
computer. Make special note of each screw size and location during removal and replacement.

Top cover

Description
For use only on computer models equipped with a fingerprint reader
For use only on computer models not equipped with a fingerprint reader
Before removing the top cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
Components described in this chapter should only be accessed by an authorized service
Spare part number
758051-001
758050-001
Component replacement procedures
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

350 g1

Table of Contents