Navigating And Selecting In Computer Setup - HP 355 G2 Maintenance And Service Manual

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
NOTE:
navigate and make selections in Computer Setup.
NOTE:
arrow keys to navigate.
2.
Press
To select a menu or a menu item, use the keyboard arrow keys and then press enter, or use a
●
pointing device to click the item.
To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
●
screen, or use the up arrow key or the down arrow key on the keyboard.
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
●
then follow the on-screen instructions.
To exit Computer Setup menus, choose one of the following methods:
To exit Computer Setup menus without saving your changes:
●
Click the Exit icon in the lower-right corner of the screen, and then follow the on-
screen instructions.
– or –
Use the
without saving changes.
To save your changes and exit Computer Setup menus:
●
Click the Save icon in the lower-right corner of the screen, and then follow the on-
screen instructions.
– or –
Use the arrow keys to select Exit > Exit Saving Changes, and then press enter.
Your changes go into effect when the computer restarts.
104 Chapter 7 Computer Setup (BIOS)
You can use either a pointing device (TouchPad or USB mouse) or the keyboard to
Your pointing device may not function within the BIOS. If it does not, please use the
f10 to enter Computer Setup.
esc key to exit. A prompt will appear, reading Exit Saving Changes? Select no to exit
esc while the "Press the ESC key for Startup Menu"