Rear Rack - Bike Friday tikit Manual

Accessories: Front & Rear Rack
4. Ensure your quick release
is located out of the way, and
attach the rack to the right
dropout using the supplied
bolt (4mm hex key).
5. Tighten the brake arm
mounting bolts, securing the
rack in front of the brake.

Rear Rack

1. Install rack by using 4mm
hex wrench to secure the
rack onto the bicycle with
four bolts. Two near the
rear hub, and two near the
seat latch. If you have a
fender, remove the fender
support bar (B.) and plastic
foot and use the bolt to at-
tach the fender to the center
rack strut.
800-777-058 • +1-541-687-0487 www.bikefriday.com
B.
1