Table of Contents
Advertisement
Accessories: Front Rack
1.
The front rack consists of a
frame designed to carry one
bag on the right side of the
bike. It mounts in front of the
brakes and to the right side
fork dropout (the bolt for this
is supplied with the rack).
The rack is very simple. It
comes with one bolt and then
uses the two front brake bolts
to finish attaching it to the
bike.
2. With a 5mm hex key,
unscrew the mounting bolts
holding your brake arms to
your front fork. There is no
need to remove the brakes
from the bike,just unscrew
the bolts enough to create
room for the rack.
3. Position your rack as
shown so the bolt holes in
the front rack line up with
the bolt holes for the brake
arms.
18
www.bikefriday.com
800-777-0258 • +1-541-687-0487
Accessories: Front & Rear Rack
4. Ensure your quick release
is located out of the way, and
attach the rack to the right
dropout using the supplied
bolt (4mm hex key).
5. Tighten the brake arm
mounting bolts, securing the
rack in front of the brake.
800-777-0258 • +1-541-687-0487
19
www.bikefriday.com
Advertisement
Table of Contents
