Replacement Parts For Your Tikit ™ Bicycle - Bike Friday tikit Manual

Basic Maintenance and Replacement
Parts for your tikit™
Your tikit™ should provide many years of reliable service. How-
ever, there are some non-standard parts that may wear over time.
Latch rings: If your tikit™ loses its
positive latch action, then replacment
latch rings are available from Bike
Friday. These are easy to install with
a 5mm hex key and 10mm wrench.
Seatmast and Bottom Bracket pivots: The pivot pins may eventu-
ally need replacement. We recommend this be carried out by your
tikit™ Agent or the BF service department.
The Seatmast pivot has 4 bolts. The
outer two must remain tight to grip
the pin. The inner two can be used
to adjust the resistance of the folding
Seatmast.
A few drops of oil on these latches and
pivots will keep them working
properly.
The Bottom Bracket pivot tension
can be adjusted by tightening the bolt
and nut.
Cable: The unique feature of the hyperfold tikit™ is the cable
which locks the stem when the rear end is latched. It is important
that the cable is installed to the correct tension, so we recommend
that replacements are fitted by your tikit™ Agent or the Bike Fri-
day service department.
Latches: Should the seatmast or stem latches get accidentally
damaged, then replacements are available from Bike Friday - both
parts simply bolt in place on the main frame.
Both the Stem Riser and Seatmast extension are available in a
range of sizes and materials, so it is possible to change the fit of
your bike at a later date. Contact your tikit™ Agent or Bike Friday
for further information.
All the other parts on your tikit™ are standard bike parts, and
thus should be servicable by any bike mechanic.
800-777-058 • +1-541-687-0487
For adjusting
www.bikefriday.com
15