Rear Rack - Bike Friday Silk User Manual

Accessories: TravelTrailer
Install the Trailer Wheels
Insert the axle bolt through
the recessed bearing side of
the wheel. Once the bolt is
in the wheel; the head of
the bolt should be flush with
the wheel, it should not
stick out. If the bolt head
sticks out, the wheel needs
to be flipped around to the
other side.
Insert the Axle and Wheel
into the T Piece.
Note, both the T piece and
the axle have a small hole in
them, you will be lining up
these holes and then placing
the wheel pin through both
holes.
Insert the Clevis Pin
Insert the clevis pin through
the hole in the axle to secure
the wheel. If the clevis
pin does not readily slide
through the holes, try rotat-
ing the bolt 180 degrees to
provide better alignment of
the holes.
44
www.bikefriday.com
Fig. 65 Install trailer wheels.
Fig. 66 Line up the holes.
Fig. 67 Insert the clevis pin.
800-777-0258 • +1-541-687-0487
Accessories: Rear Rack
Folding Rear Rack
This handmade folding cro-
moly rear rack will securely
carry your travel gear any-
where in the world. Plus, it
folds quickly and compactly
for easy packing in your
TravelCase suitcase. The
rack is packed in a yellow
felt bag, and has two extra
5mm bolts for mounting it to your bike. (The other two required
bolts are already in your frame.)
Unfold Rack
The two sets of main legs unfold down, while the two stainless
steel stays unfold over the top.
Insert 5mm Bolts
Let the holes in the main
legs overlap at the bottom
and then insert a supplied
5mm bolt through each pair
of legs.
800-777-0258 • +1-541-687-0487
Fig. 68 Folding rear rack.
Fig. 70 Place bolts through leg holes.
www.bikefriday.com
45