Using A Quick Release - Bike Friday tikit Manual

Using a Quick Release

Using Those Nifty Quick Releases
On a cold and snowy day in the 1927 Gran Premio della Vittoria, a
tired and numb Tullio Campagnolo struggled with the frozen wing
nuts on his rear wheel while trying to change gears. In a moment
of frustration and inspiration Campagnolo envisioned the modern
quick release, and the bicycle world was transformed.
The quick release is one of those simple but great inventions that
really makes life better. However, if used incorrectly you can poten-
tially endanger yourself. Although a reliable and safe product, some
people have been injured because they didn't know how to prop-
erly use this elegant device. Your Bike Friday has one on each
tikit™
wheel. If you are not familiar with their operation, PLEASE study
these directions carefully. If you are still unclear on their operation,
call us or contact your local tikit™ Agent before your ride!
Quick Release Operation
A quick release is a simple cam with a lever that swings through an
arc that is square to the axle. As the lever moves the cam clamps the
wheel to the frame, or secures the frame joint. It is not a wing nut to
be rotated about the axle.
The tension on the quick release is controlled by how tight the
knurled nut on the other end is set. Only wheel quick releases have
the small cone-shaped springs. Note that the small ends of the
springs face toward the center of the hub.
Quick Release Maintenance
We recommend adding a few drops of light oil to the lever where
it enters the cap several times per year. This will keep your quick
release working smoothly for years to come.
Open
(Loose)
Knurled Nut
Cam
(adjust tightness here)
(Starts
getting
tight
here)
Springs
QR Lever
Closed
(Stiff)
1
800-777-058 • +1-541-687-0487 www.bikefriday.com