Packing Your Tikit™ Bicycle In A Suitcase - Bike Friday tikit Manual

Packing your tikit™ in its suitcase
1. Put bike in lowest gear (1 on shifter)
2. Open Front Brake
To release your front V-brake, press
the arms together, and then pull the
elbow-shaped noodle out and up
while pushing the noodle holder
down. There is a slot in the end of
the noodle holder for the brake cable
to slip out.
3. Remove front fender (see page
16). If you have a front rack you
must remove it also (see page 17)
4.
Fold Pedals
5. Remove Front Wheel
After removing the front wheel, close
the brake again. Remove the quick
release from the axle by undoing the
knurled nut. Be careful not to lose the
small cone-shaped springs.
5. Remove seatpost/saddle and
put on their protective covers.
See * at bottom of page 25 if you
have a small
tikit™.
NOTE: If you have a Model T.,
completely remove the spin knob
and latch. Place in tool bag.
6. Loosen stem clamp where unpainted
stem riser enters the folding stem.
Remove handlebars and stem and put
on protective covers.
4
www.bikefriday.com
Loosen the seat mast clamp using
your 4 mm hex wrench.
800-777-058 • +1-541-687-0487