3Com Switch 4007R Getting Started Manual page 25

Table 7 Tasks to Perform After You Power On the Switch
Task Description
Configure the To configure the EME, set:
Enterprise
Terminal settings
I
Management
Time and date
Engine I
Device (Contact, Diagnostics, Location,
I
and Name)
SNMP parameters to enable network
I
access
Mastership priority, if you have two
I
EMEs
Connect to a To configure and monitor your Switch,
terminal or a connect a PC, terminal, or modem to the
modem EME console port.
You can manage your Switch locally
through a terminal connection or
remotely using a Telnet or modem con-
nection.
Perform initial Initially you access the Switch through the
management RS-232 port.
access
With network access, you can manage
the Switch 4007R from a remote terminal
or SNMP manager.
Where to Go from Here 25