Table of Contents
Advertisement
INSTALLATION
FIREPLACE INSTALLATION
The following installation instructions apply to several different product types.
Please identify your fireplace type on page 3 before proceeding. It is recommend
to perform a mock-installation first to familiarise yourself with the process.
Note: the images used below are for illustrative purposes only and may differ from
actual products. Also, illustrations show the fitting of a four piece back panel,
however the same instructions apply when fitting a three piece back panel.
STEP 1 – FIREPLACE TYPE A, B & C
Bed the hearth ensuring that
it is central to the fire, level and
secure. Use a mix of washed sand and
white cement to avoid any unwanted
colour absorption through the hearth.
Alternatively, use a polythene membrane
to prevent this. Refer to building regulations
when fitting the hearth and back
panel.
STEP 2 – FIREPLACE TYPE A, B & C
Ensuring that the gas fire has been
installed in the correct position, fix
the three or four piece back panel
to the wall. Each piece should be
fitted around the fire using adhesive
only.
Advertisement
Table of Contents
