Channel Scan; Adjust The Volume - Retevis RT-35 User Manual

status.
After the channel number icon stop flashing, the unit
Ÿ
automatically save your settings and return to the receiving
status.
Select CTCSS/DCS which allows you to receive calls from
members of the same group (same mute code) issued,
avoiding the same frequency interference from other users.
Note: CTCSS / DCS cannot make your talking content keep
secret, it can only make you unable to receive calls from
other CTCSS / DCS users.
1、 when standby, press the power / menu button twice, until
the mute code of current channel starts flashing, thus enter
the reset status of CTCSS / DCS.
Press the up arrow key or down arrow key to select the
Ÿ
mute code.
Long press the up key or down arrow key to select the
Ÿ
mute code quickly.
2、 Press the PTT / CALL to save the settings. Or press the
power / menu button to enter next function option.
Scan function lets you scan all channels occupancy.
1、when standby, press the Scan button to activate scan
function, the machine starts to scan all channel activities),
when there are voices in scanned channel, it will stay 4~5s in
this channel, then continue to scan next channel.)
2、press the Scan key to exit the channel scan.
Transmission and reception
1、On receiving status once power on.
2、Press and hold the PTT / CALL to sends voice. Use the
normal voice to transmit, there should be 5 cm between
mouth and microphone.
3、After Speaking, release the speaking key/call key, the
machine is in the receiving status.
Function Description

Channel scan

Adjust the volume