Page 2
1.Antenna 11.Speaker 2.Volume Up 12.PTT 3.Volume Down 4.Channel Display 5.CTCSS/DCS 13.Lamp Key Number 14.Vox 6.TX/RX Icon 15.Power display 7.Volume 16.Lock 8.Microphone 9.MENU 10.Power Button 17.Lamp...
Page 3
Instructions for use Specific recommendations: 1.To avoid the risk of burns, do not use the device if the antenna is damaged in any way. 2.Do not use the device in a potentially explosive environment. 3.Switch off the device if on an airlane or in a hospital.
Page 4
Unpacking and checking equipment Welcome to use two-way radio. Carefully unpack the radio. We recommend you check the listed in the following table before discarding the package. If any item is missing, please contact us immediately. Supplied accessories: 1 x Micro-USB 2 x two-way radio 2 x Belt clip User s Manual...
1.Battery Precautions 1.Requires 6 AAA batteries included. Batteries are to be changed by an adult. 2.Non-rechargeable batteries must be removed from toy before being recharged and rechargeable batteries shoud be charged under adult supervision. 3.Do not mix alkaline, standard(carbon zinc),or rechargeable(nickel cadmium) batteries.
2.Product description Civilian handheld license-free two-way radio. 2. Automatic squelch 3. Call tone (10 sets of call sounds to select ) 4. Keyboard lock (long press key to lock the keyboard misuse) 5.LED flashlight 6.7 kinds of LCD display 7. Low battery alarm 8.DCS 14,14 channels, each channel a digital coded squelch 9.
Page 8
3.2 Adjusting the volume To increase the volume, press the Up adjustor button ▲and press the Down▼button to decrease volume. Note: The volume level (8) is displayed on the screen. 3.3 Function option switch After pressing the power button to enter the menu settings: 1.Changing the channel: press the button once,...
Page 9
5 = High sensitivity under low background noise. 4 = Medium High Sensitivity Under Low Background Noise Use. 3 = Sensitivity for most applications 2 = Medium low sensitivity for high background noise. 1 = low sensitivity for high background noise. Note: 1.
Page 10
Battery Full Battery 2/3 charged Battery 1/3 charged Battery empty When the battery power is low, the battery icon will flash and there will be a beep indicating that the batteries need to be replaced or recharged . 3.7 Memory function There is a memory function (including the on / off status) when the machine is turned off or off, and there is no need to reset the channel...
Page 11
immediately after the release of the PTT button to release. Let the other party at any time call, note the same frequency for the radio, so when the letter can not write, Send no letter when the letter, in the launch of the signal when they can not hear each other to speak, the other side speaking time can not talk with each other, if forced to speak according to PTT, the other party...
Page 13
Name Gender Add and postal code: Note: 1.This warranty card is only applicable to two-way radio of the above-listed model and serial number. 2.The warranty card is an important document for the end-user to enjoy warranty service, please keep it well. 3.The warranty card shall be filled and chopped by the dealer ,or it is invalid.
Page 14
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.
Need help?
Do you have a question about the RT36 and is the answer not in the manual?
Questions and answers