Using A Cradle - Motorola MC7090CN User Manual

4 - 14 MC7090CN User Guide
Pull the trigger on the handle. The Scan/Decode LED lights and a beep sounds to indicate a successful
3.
decode.
Scanning with the Trigger Handle
Figure 4-15

Using a Cradle

Do not place a Trigger Handle with an attachment, such as a Magnetic Stripe Reader
CAUTION
(MSR) into a cradle. Remove the attachment before inserting the Trigger Handle into the cradle.
To charge the EDA's battery while the EDA is in the Trigger Handle, insert the EDA into either the Single-Slot
USB/Serial cradle or the Four-Slot Ethernet cradle.
Inserting the EDA Into the Cradle for Charging
Figure 4-16