Figure 7: Lift Battery Latch
5 Remove the battery out of the battery compartment.
Figure 8: Remove Battery
6 Align the replacement battery in the battery compartment.
7 Lower the battery and press down until it snaps into place.
8 Press down on the battery latch.
9 Press the Power button to turn on the MC40.
Battery Management
Note:
Prior to checking the battery charge level, remove the MC40 from any AC power source (cradle or cable).
To check the charge status of the main battery, touch
Battery status indicates that the battery is discharging and Battery level lists the battery charge (as a percentage of
fully charged).
or
>
About device > Status.
Getting Started | 23
MN000111A04-A | July 2015