Setting The Date And Time - Motorola MC40 User Manual

When the battery charge drops below 15%, the MC40 sounds an alert and displays a notice to connect the MC40 to
power.
When the battery charge drops below 12%, the MC40 sounds an alert and screen turns off. The Right and Left LEDs
light red while goes into critical suspend mode to save data. Once it reaches critical suspend the Right and Left LEDs
turn off.
The user must replace the battery or charge the MC40 using one of the charging accessories to retain data.
Battery Optimization
Observe the following battery saving tips:
• Leave the MC40 connected to AC power at all times when not in use.
• Set the screen to turn off after a short period of non-use.
• Reduce the screen brightness.
• Turn off all wireless radios when not in use.
• Turn off automatic syncing for Email, Calendar, Contacts, and other applications.
• Use the Power Control widget to check and control the status of radios, the screen brightness, and syncing.
• Minimize use of applications that keep the MC40 from suspending, for example, music and video applications.

Setting the Date and Time

The date and time is automatically synchronized using an NTP server when the MC40 is connected to a wireless
network. The user is only required to set the time zone or set the date and time when not connected to a wireless
network.
Procedure:
1
Touch or .
2 Touch
Date & time.
3 Touch Automatic date & time to disable automatic date and time synchronization.
4 Touch Automatic time zone to disable automatic time zone synchronization.
5 Touch Set date.
6 Move the sliders up and down to select the month, date and year.
7 Touch Done.
8 Touch Set time.
9 Move the sliders up and down to select the hour, minutes and part of the day.
10 Touch Done.
11 Touch Select time zone.
12 Select the current time zone from the list.
13 Touch
.
Getting Started | 25
MN000111A04-A | July 2015