Chapter Descriptions; Notational Conventions - Motorola MC40 User Manual

12 | About This Guide
Example Build Number: 0z-4AJ11–J-xxxx–xxxx–y0–M1–mmddyy
• z = software version number
• y = VoIP telephone ready
where:
• 0 = not VoIP telephony ready
• V = VoIP telephony ready.
• F = FIPS & VoIP telephony ready.
KitKat Build Number
The build number contains the software revision number and whether the MC40 is VoIP telephony ready and FIPS
ready.
Example Build Number: 0z-xx–xx-4AJ22–K–y0–M1–mmddyy
• z = software version number
• y = VoIP telephone ready/FIPS ready
where:
• V = VoIP telephony ready.
• F = FIPS & VoIP telephony ready.

Chapter Descriptions

Topics covered in this guide are as follows:
• Getting Started on page 15
• Using the MC40 on page 31
resetting the MC40.
• Applications on page 49
• Data Capture on page 77
optional scan modules and Bluetooth scanner.
• WLAN on page 89
• Bluetooth on page 91
• Accessories on page 97
• Maintenance and Troubleshooting on page 105
provides troubleshooting solutions for potential problems during MC40 operation.
• Technical Specifications on page 113

Notational Conventions

The following conventions are used in this document:
• Italics are used to highlight the following:
- Chapters and sections in this and related documents
- Icons on a screen.
• Bold text is used to highlight the following:
- Dialog box, window, and screen names
- Drop-down list and list box names
- Check box and radio button names
July 2015 | MN000111A04-A
provides information on getting the MC40 up and running for the first time.
provides basic instructions for using the MC40, including powering on and
Provides information on specific applications installed on the device.
provides information for capturing bar code data using the internal camera and
provides information for configuring Wi-Fi.
provides information for configuring Bluetooth.
describes the available accessories and how to use them with the MC40.
provides the technical specifications for the MC40.
includes instructions on cleaning and storing the MC40, and