Seat Adjustment; Auxiliary Lift System Settings - Husqvarna P520 D Operator's Manual

ASSEMBLING AND ADJUSTMENTS

Seat adjustment

WARNING! Take care so that hands are not
!
trapped or injured by the locking hooks
when the seat is folded back.
WARNING! Do not adjust seat settings while
!
driving. Risk of unsafe manoeuvring.
The seat has a jointed attachment on the front edge and can
be tipped forward. To fold the seat forward, the latch for the
seat must be operated.
The seat can also be adjusted lengthways. When making
adjustments, the lever under the front edge of the seat is
moved up, after which the seat can be moved backwards or
forwards to the desired position.
The seat suspension can be adjusted to driver's weight. The
weight is adjusted by turning the knob under the front edge of
the seat .
On the sides of the backrest are two knobs:
• Seatback angle is adjusted with the knob on the right side.
• The lumbar support is adjusted with the knob on the left
side of seat back .

Auxiliary lift system settings

The auxiliary lift system transfers the weight of the cutting unit
pivot wheel to the machine's front wheel.
The effect of the auxiliary lift system can be adjusted by
moving the gas spring up or down.
• Maximum effect is obtained when the gas spring is placed
in the top hole.
• No effect is obtained in the slot at the bottom.
• When using the cutting unit, the gas spring must be
mounted in the top hole.
– 15
English