Catch (P 525D)
1
Half speed catch.
2 Full speed catch.
3 Forward pedal
The forward pedal has a catch that can be foot operated.
When the catch is in full-speed position (2), the driver can fully
depress the forward pedal.
With the catch pulled back, the control goes to half-speed
position (1). The driver can then release the pedal and cut
uneven surfaces at a steady speed.
Accelerator check
•
Ensure the forward and reverse pedals can be operated
freely.
•
Ensure the machine brakes when the forward pedal is
released.
•
Ensure the catch returns to full-speed position by lifting up
the forward pedal with your foot.
Parking brake
Operate the parking brake by moving the handle forwards.
Checking the parking brake
Make sure the parking brake is properly adjusted by placing
the machine on a slope.
•
Apply the parking brake.
•
When the machine does not stand still, the parking brake
should be adjusted.
10 –
English
MACHINE´S SAFETY EQUIPMENT
ROPS (Roll Over Protective
Structure)
ROPS is a protective frame that reduces the risk of injury in
the event of overturning. Use ROPS and a safety belt when
driving on slopes.
The frame can be folded down.
•
Remove the two pins that hold the frame and fold it
backwards.
WARNING! If the frame is folded down the
!
safety belt should NOT be used.
When the safety belt is not used, it must be wrapped around
the chair back and tightened.
WARNING! If the frame is folded up, the
!
safety belt must be used.