Table of Contents
Advertisement
3 C
ONFIGURING THE NANO
The nanoAVR is configured with the nanoAVR_BM plugin / user interface program. Once the nanoAVR is fully
configured, the user interface is no longer required, as source and preset selection can be done with the front
panel or a remote control – see
connected during use for real-time ("live") control of all settings in the nanoAVR.
This screenshot shows the nanoAVR_BM plugin with the key areas highlighted:
Note: during initial configuration of the nanoAVR, it is recommended that the connected HDMI output
device be muted.
mi niDSP Ltd, Hong Kong /
www.minidsp.com
AVR
Using the nanoAVR
below. If desired, however, the user interface can remain
/ Features and speci fi cations subject to change wi thout pri or noti ce
17
Advertisement
Table of Contents
