Infrared Remote Control - miniDSP NANOAVR HD User Manual

4.3 I
NFRARED REMOTE CONTROL
Many standard and programmable remote control units can be used with the nanoAVR. Instead of adding
another remote to your collection, the nanoAVR can "learn" the control codes of your current remote if it
supports one of the following remote control codes:

NEC

Sony

Philips RC6

Apple Remote
To initiate the learning process, drop down the IR Remote menu and select IR learning. Click on the Learn button
for an operation, and then press the desired button on the remote control. If the code is accepted, the status
will change to show a tick.
This screenshot shows the IR learning screen:
The commands Config Inc and Config Dec can be used to change the selected configuration preset up or down.
This can be used instead of Config 1, Config 2 and so on. Once programmed, check that the programmed
buttons perform the expected function.
Note: changing the selected configuration preset with the remote will cause the user interface to disconnect.
mi niDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change wi thout pri or noti ce
34