Configuring The 2X4 Hd - miniDSP 2X4 HD User Manual

6 C
ONFIGURING THE
The 2x4 HD processor is configured with the miniDSP-2x4-HD plugin / user interface program. Once fully
configured, the computer is no longer required, as source and preset selection can be done with a remote
control—see Infrared Remote Control
use for real-time ("live") control of all audio processing.
This screenshot shows the miniDSP-2x4-HD plugin with the key areas highlighted:
During initial configuration of the processor, it is strongly recommended that any connected
amplification be powered off.
The Mute button disables all audio output:
The Master Volume display shows the current volume setting:
miniDSP Ltd, Hong Kong / www.minidsp.com
2 4 HD
X
on page 38. If desired, however, the plugin can remain connected during
/ Features and specifications subject to change without prior notice
17