Table of Contents
Advertisement
3.1 C
AVR
ONNECTING TO THE NANO
Communication with the nanoAVR can take place either over USB or Ethernet.
3.1.1 USB
Ensure that the computer is connected to the nanoAVR by a USB 2.0 port (see
Hardware connectivity
above).
Then click on the Connect button:
3.1.2 Ethernet
Connect the nanoAVR to your local area network by plugging in the Ethernet cable. The following dialog will
appear:
Click on Connect to proceed.
3.1.3 Options
The first time you connect, or if you have made any changes to any data in the user interface, the following
dialog box will appear. It is recommended that the first time you connect, use Restore Config to ensure a known
starting state. Thereafter, use Synchronize Config.
18
mi niDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and speci fi cations subject to change wi thout pri or noti ce
Advertisement
Table of Contents
Need help?
Do you have a question about the NANOAVR HD and is the answer not in the manual?