Saving And Loading Configurations - miniDSP NANOAVR HD User Manual

If the user interface is not connected, then the screen will update to show the parameters of the newly selected
configuration. If this configuration is changed in the user interface, it will be downloaded to the nanoAVR next
time it is synchronized.
Note: because of the potential for a selected configuration to be in an unknown state, we
recommend that each configuration be selected and checked/initialized prior to connecting to the
nanoAVR for the first time.

3.7.2 Saving and loading configurations

Configurations can be saved to and loaded from files. Each configuration is stored in a separate file. It is strongly
recommended that each configuration programmed into the nanoAVR be saved to a file, to ensure that the
configuration is not lost if the nanoAVR is inadvertently reset. A configuration file stores all of the audio
processing parameters except for the master volume setting and the HDMI input selection.
To save the currently selected configuration to a file, drop down the File menu, then select Save and then Save
current configuration. In the file box, select a location and name of the file, and save it.
To load a configuration, first select the configuration preset that you wish to load the parameters into. Then
drop down the File menu, select Load, and then Load configuration to current slot.
If the user interface is live, the loaded configuration data will be downloaded to the nanoAVR immediately, and
audio processing will recommence with the new configuration. If it is not, the configuration will be loaded into
the user interface only, and will be downloaded to the nanoAVR the next time it is synchronized.
Tip: To copy a configuration from one preset to another, simply save the configuration to a file, then select a
different preset and load the file.
mi niDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change wi thout pri or noti ce
31