Table of Contents
Advertisement
2.1.3 DC Power
The supplied 5 VDC power supply includes a set of interchangeable power pins. Fit the co rrect pins for your
country. Connect the DC plug to the 5 VDC power socket.
HDMI units communicate with a set of "hand-shaking" signals in order to establish the capabilities
of each device. It is recommended that for at least the first time the system is powered up with the
nanoAVR connected, equipment is powered on in this order: TV, AVR, nanoAVR, source/player.
2.1.4 USB
To configure the nanoAVR via USB, connect the USB port of the nanoAVR to a USB 2.0 port on your computer
using the supplied cable.
mi niDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and speci fi cations subject to change wi thout pri or noti ce
13
Advertisement
Table of Contents
Need help?
Do you have a question about the NANOAVR HD and is the answer not in the manual?