Table of Contents
Advertisement
6.3 MCU F
IRMWARE UPGRADE
miniDSP may periodically provide an update to the nanoAVR HD/HDA MCU firmware to enable new features.
The most recent MCU firmware is always included in the installation folder of the plug-in download.
Note that firmware update is currently supported only on the Windows platform.
To update the MCU firmware:
1.
Download and install the latest nanoAVR_BM plugin from the User Downloads section of the miniDSP
website.
2.
Connect the nanoAVR to your computer via USB.
3.
Start the nanoAVR_BM plugin (if it is not already running).
4.
Click on the Connect button. The button will display a green tick if connection is successful.
5.
From the menus, select Restore -> Upgrade Firmware. The nanoAVR will be put into boot loader mode,
indicated by just the Preset 1 LED flashing on the front panel. The PIC32 Bootloader application will
automatically start.
6.
Check the Enable checkbox in the USB pane near the bottom of the window.
mi niDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and speci fi cations subject to change wi thout pri or noti ce
43
Advertisement
Table of Contents
