Table of Contents
Advertisement
The system displays the new owner tag.
To delete the owner tag without assigning a new one, perform the following steps:
1. Click the Start button, point to Programs, and click MS-DOS Prompt.
2. Type asset /o /d and press <Enter>.
NOTE: For security, you cannot set, change, or delete the owner tag if the primary or administrator
passwords are set.
Table 1
lists the command-line options you can use with the Asset Tag utility. To use one of these options,
open an MS-DOS prompt, and then type asset and a space followed by the option.
Table 1. Asset Tag Utility Command-Line Options
Asset Tag
Description
Option
Deletes the asset tag number
/d
Specifies a new owner tag
/o <tag>
/o /d
Deletes the owner tag
/?
Displays the Asset Tag utility help screen
Back to Contents Page
Advertisement
Table of Contents
