Dell Latitude CPi A-Series User Manual page 55

Back to Contents Page
AC Adapter: Dell
Using the AC Adapter
Using the AC Adapter
The AC adapter converts AC power to the DC power required by the computer. The AC adapter kit includes
two cables: the AC adapter cable and an AC power cable.
You can connect the AC adapter with your computer either turned on or off.
The AC adapter works with AC power sources worldwide. However, power connectors vary among
countries. Before using AC power in a foreign country, you may need to obtain a new power cable designed
for use in that country.
If the computer is docked to the C/Port Advanced Port Replicator (C/Port APR) or C/Dock Expansion Station,
connect the AC adapter to the C/Port APR or C/Dock Expansion Station, not to the computer.
NOTE: If you are running your computer on AC power with a battery installed, the AC adapter charges
the battery (if needed) and then maintains the battery's charge.
CAUTION: The AC adapter should be in a ventilated area, such as on a desktop or on the floor,
when used to power the computer or charge the battery. Do not use the AC adapter in a poorly
ventilated environment, such as inside a carrying case.
Connecting the AC Adapter
To connect the AC adapter, perform the following steps:
1. Connect the AC power cable to the AC adapter (See
2. Plug the AC adapter cable into the AC adapter connector on the computer.
3. Plug the AC power cable into an AC power source.
Figure 1. Connecting the AC Adapter
™
Latitude
| Connecting the AC Adapter
™
CPi A-Series System User's Guide
Figure 1).