Table of Contents
Advertisement
CAUTION: The PC Card eject button can be damaged if left in the "out" position. If
you accidentally press the PC Card eject button, remove and reinstall the PC Card
immediately to make sure the button stays flush with the computer case.
Figure 2. Removing a PC Card
To protect the PC Card connectors, install a blank if you are not going to use the connector.
Configuring PC Cards
The PC Card configuration utility performs the following functions:
Notifies you whenever a PC Card is inserted and tells you how the card is configured
Automatically loads the proper device driver if it is available on the hard-disk drive
If drivers are not available on the hard-disk drive, prompts you to install them using the device driver
diskette that came with the card
The operating system automatically detects a PC Card and opens the Add New Hardware menu from the
Control Panel. See the PC Card operating system documentation for information.
Back to Contents Page
Advertisement
Table of Contents
