Dell Latitude CPi A-Series User Manual page 109

If you received the system utilities separately on diskette or if you deleted the Suspend-to-Disk utility
from your hard-disk drive
To create an S2D partition, perform the following steps.
NOTE: If you are creating the partition on a new hard-disk drive, if Dell did not install MS-DOS on your
hard-disk drive, or if you are using an operating system that is not compatible with MS-DOS, read the
readme.s2d file before using the following procedure.
1. At an MS-DOS prompt, type cd c:\dell\util and press <Enter> to change to the directory on your
hard-disk drive that contains the Suspend-to-Disk utility files.
2. Type mks2d and press <Enter>.
As the utility builds the partition, status messages appear on the display. If an error message
appears, it provides information about which steps to take to continue building the partition.
When the S2D partition has been built and verified, the following message appears:
The S2D partition was successfully created.
Back to Contents Page