Changing The Display Language; Holding This Unit; Tripod Mounting - JVC EVERIO GZ-EX210 User Manual

Changing the Display Language

The language on the display can be changed.
1
Tap "MENU".
≪PLAY
When entering from the recording mode, tap "MENU" again as the
0
shortcut menu appears.
2
Tap "Q" (common).
3
Tap "LANGUAGE".
COMMON
LANGUAGE
Tap 3 or 2 to move upward or downward for more selection.
0
4
Tap to the desired language.
LANGUAGE
Tap 3 or 2 to move upward or downward for more selection.
0
REC MENU
ENGLISH

Holding this Unit

When holding this unit, keep your elbows close to your sides to prevent
camera shake.
Hold the LCD monitor with your left hand and adjust the angle accordingly.
0
Holding the LCD monitor with your left hand helps to stabilize the camera
for recording.
Caution :
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is being used by
0
children.
Memo :
If camera shake is excessive, use the image stabilizer.
0
"Reducing Camera Shake" (A p. 104)

Tripod Mounting

This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the same position.
To prevent this unit from falling off, check the tripod mounting screw holes
0
and positioning holes on the unit carefully before mounting, and turn the
screws until they are fastened firmly.
Caution :
To prevent injuries or damages which may result if this unit falls off, read
0
the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.
Memo :
It is recommended to use a tripod or monopod when recording in
0
conditions prone to camera shake (such as in dark places or when zoomed
to the telephoto end).
Set the image stabilizer to b (OFF) when using a tripod for recording.
0
Getting Started
71