Capturing Smiles Automatically (Smile Shot) - JVC EVERIO GZ-EX210 User Manual

The targeted subject (color) may also be tracked back again if it appears
in the center of the screen within a specific time.
Caution :
Subjects near the sides of the LCD monitor may not respond or be
0
recognized when tapped. In this case, move the subject to the center and
tap again.
"FACE TRACKING" may not work properly depending on the shooting
0
conditions (distance, angle, brightness, etc.) and the subject (direction of
face, etc.). It is also particularly difficult to detect faces in backlight.
"PET TRACKING" may not work properly depending on the type of pet,
0
shooting conditions (distance, angle, brightness, etc.) and the subject
(direction of face, etc.). It is also particularly difficult to detect faces of pets
that are totally black, covered in long hair, or in backlight.
"COLOR TRACKING" may not function properly in the following cases:
0
- when recording subjects with no contrast
- when recording subjects that are moving at high speed
- when recording in a dark place
- when the surrounding brightness changes
When "FACE TRACKING" is set, the subject may be lost if the camera is
0
moved vertically or horizontally very fast. For unregistered faces, they
cannot be tracked back again. To track back the subject, tap on it again.
For registered faces, focus and brightness will be adjusted automatically
even without specific selection. In addition, registered faces may be
tracked back again even if they are lost. Therefore, it is recommended to
register the faces that are often being recorded by this camera
beforehand.
"Registering Human Face Personal Authentication Information"
(A p. 100)

Capturing Smiles Automatically (SMILE SHOT)

"SMILE SHOT" automatically captures a still image upon detection of a
smile.
This function is available for both videos and still images.
Set "TOUCH PRIORITY AE/AF" to "FACE TRACKING" before selecting
"SMILE SHOT".
"Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)" (A p. 94)
1
Open the LCD monitor.
Set the recording mode to either A video or B still image.
0
To switch the mode between video and still image, tap A or B on the
0
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
(You can also use the A/B button on this unit.)
2
Tap "MENU".
≪PLAY
The shortcut menu appears.
0
3
Tap "MENU". (Go to step 4.)
Alternatively, tap "SMILE SHOT"(8) in the shortcut menu. (Go to step
5.)
4
Tap "SMILE SHOT".
VIDEO
SMILE SHOT
Tap 3 or 2 to move upward or downward for more selection.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
5
Tap "ON".
SMILE SHOT
OFF
ON
Tap L to exit the menu as the previous screen appears.
0
6
Point the camera toward the human subject.
A still image is automatically captured when smiles are detected.
0
Recording
REC MENU
MENU
95