Record And Send Videos Via E-Mail (Video Mail Attn.) - JVC EVERIO GZ-EX210 User Manual

Record and Send Videos via E-mail (VIDEO
MAIL ATTN.)
Videos of up to 15 seconds can be recorded and sent via e-mail.
With this function, short videos can be delivered easily even on a daily basis,
such as to show the growing up of small children to their distant
grandparents.
Memo :
Specifications of the videos sent via video mail are as follows:
0
System: MP4
Video:
- H.264/MPEG-4 AVC baseline profile codec
- 640 x 360 resolution
- 25p frame rate
- 1 Mbps bit rate
Audio:
- Advanced Audio Coding (AAC) system
- 48 kHz sampling rate
- 16 bit
- 2 channels
Caution :
Be careful not to cause too much sending of e-mails. Depending on the
0
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
When setting another person as the recipient, be sure to obtain his/her
0
consent in advance.
Depending on the e-mail service provider, the sending of video mail may
0
not be supported.
Too much usage may cause high communication fees to be incurred, and
0
there may be a limit to the volume of communication. For more details,
please check your Internet or smartphone subscription.
If you reply to the received e-mail by using this unit, the receiver can not
0
check your replied e-mail by using this unit.
Check the e-mails sent by this unit from computer, etc.
JVC will not be responsible for any trouble that occurs upon the sending
0
of mails.
Videos captured via video mail are not saved to the camera or SD card.
0
Videos that have already been captured cannot be sent.
0
What You Need
Wireless LAN router (use a product that has a Wi-Fi certification logo)
0
Internet connection
0
Account for sending e-mails (Supports SMTP. E-mail services that is only
0
accessible from the web cannot be used.)
Necessary Settings
To send e-mails, the following settings are required.
*The above settings are not necessary if they have already been set for other
functions.
Registering an access point
0
"Registering the Access Points to Connect ("ACCESS POINTS")"
(A p. 35)
Setting the account for sending e-mails
0
"Setting the Sender's E-mail Address" (A p. 30)
Registering the recipient's e-mail address
0
"Registering the Recipient's E-mail Address" (A p. 33)
Selecting the Recipient's E-mail Address
o
1
Tap "MENU".
(Operation on this camera)
≪PLAY
The shortcut menu appears.
0
2
Tap "Wi-Fi" (Q) in the shortcut menu.
(Operation on this camera)
3
Tap "VIDEO MAIL ATTN.".
(Operation on this camera)
Wi-Fi
VIDEO MAIL ATTN.
4
Tap the e-mail address to be set as recipient.
(Operation on this camera)
VIDEO MAIL ATTN.
An icon a appears beside the recipient's e-mail address.
0
After setting, tap "SET".
0
Settings will not be saved until "SET" is tapped.
0
Using Wi-Fi
REC MENU
MENU
SET
25