JVC EVERIO GZ-EX210 User Manual page 101

RECORD FRONT OF SMILING FACE
Recording starts automatically. Using the smile % display as a
0
reference, smile such that the value is as high as possible.
A sound can be heard when recording is complete.
0
To cancel recording of smiling face and proceed to enter a name, tap
0
"STOP", then tap "NO" and go to step 11.
11
Tap "OK".
RECORDING COMPLETED
ENTER A NAME
Tapping "OK" registers the recorded face and the screen for entering
0
a name appears.
To cancel the registration, tap "STOP".
0
When "CANCEL FACE RECOGNITION?" appears, tap "YES" to
return to the normal recording mode.
12
Tap on the on-screen keyboard to enter a name, then tap "REG.".
REG.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
Up to 8 characters can be entered.
0
How to input characters
0
Example: To enter "KEN"
Tap "JKL" 2 times F Tap "DEF" 2 times F Tap "MNO" 2 times
13
Tap the desired priority level, then tap "REG.".
TOUCH ORDER TO RECOGNIZE
REG.
Upon registration, the last number is assigned as the priority level.
0
During face detection, the subject with the highest priority (lowest
number) will be detected.
You can change the priority level of a subject by tapping on the
0
number.
Example: To change the priority level of number 3 to number 1, tap
number 1. The priority level of the registered subject becomes
number 1, while the priority levels of the original number 1 and the
ones below drop by one place. (In this example, the original number
1 becomes number 2, and the orignal number 2 becomes number 3.)
When "REG." is tapped, the registration complete screen appears.
0
SMILE
75%
STOP
OK
STOP
DELETE
CANCEL
KEN
STOP
REGISTERED
Tap "OK" to complete the registration.
0
You can edit registered face information in "EDIT".
0
"Editing the Registered Face Information" (A p. 103)
Memo :
Faces may not be registered correctly in the following cases:
0
- when the face appears either too small or too large compared to the frame
- when it is too dark or too bright
- when the face appears horizontal or slanted
- when a part of the face is hidden
- when there are multiple faces within the frame
To increase the accuracy of face recognition, fit only one face within the
0
frame and register in a bright environment.
Faces may not be recognized correctly depending on the shooting
0
conditions and environment. In this case, register the face again.
Faces may not be recognized correctly during recording if the face
0
recognition level is low. In this case, register the face again.
Face tracking, face sub-window, and name display may not work properly
0
depending on the registered faces, shooting conditions (distance, angle,
brightness, etc.), and expressions.
Face tracking, face sub-window, and name display may not work properly
0
for people with similar facial features, such as siblings, parents, children,
etc.
Recording
OK
101