JVC EVERIO GZ-EX210 User Manual page 39

6
Tap "WPS PIN".
(Operation on this camera)
ADD
WPS PIN
The PIN code appears.
0
7
Enter the PIN code displayed on the camera to the access point
(wireless LAN router).
For details on how to enter the PIN code, refer to the instruction
0
manual of the device in use.
8
Tap "START".
(Operation on this camera)
WPS PIN
ENTER THIS NUMBER
TO ACCESS POINT
THEN TOUCH "START"
START
Tap "START" after entering PIN code to the wireless LAN router.
0
(Connection cannot be established if "START" is tapped before
entering the code.)
9
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
WPS
REGISTERED
SSID:********************************
ENCRYPTION METHOD
Editing LAN Settings of Access Points (Wireless LAN Router)
Change accordingly such as when you want to fix the IP address for the
camera.
1
Tap "MENU".
(Operation on this camera)
≪PLAY
The shortcut menu appears.
0
2
Tap "Wi-Fi" (Q) in the shortcut menu.
(Operation on this camera)
PIN:********
QUIT
WPA2
OK
REC MENU
MENU
3
Tap "NETWORK SETTINGS".
(Operation on this camera)
Wi-Fi
NETWORK SETTINGS
4
Tap "ACCESS POINTS".
(Operation on this camera)
NETWORK SETTINGS
ACCESS POINTS
5
Tap "UPDATE".
(Operation on this camera)
ACCESS POINTS
MyHome
ADD
Tap 3 or 2 to select an item to edit or delete.
0
To change connection to another access point, tap on the desired
0
access point.
6
Perform the LAN settings. (when "DHCP" is set to "OFF")
(Operation on this camera)
LAN SETTINGS
DHCP
IP ADDRESS
SUBNET MASK
After setting, tap "SET".
0
LAN settings comprise of the following items.
0
DHCP ON: Obtains IP address from the DHCP server
automatically.
OFF: Settings of "IP ADDRESS", "SUBNET
MASK", "DEFAULT GATEWAY", "PRIMARY
DNS", and "SECONDARY DNS" are required.
IP ADDRESS Enter the IP address.
SUBNET MASK Enter the subnet mask.
DEFAULT Enter the default gateway.
GATEWAY
PRIMARY DNS / Enter the IP addresses of the primary and
SECONDARY DNS secondary DNS servers.
Using Wi-Fi
UPDATE DELETE
OFF
SET
39