Capturing A Still Image In The Video During Playback; Capturing A Required Part In The Video (Trimming) - JVC EVERIO GZ-EX210 User Manual

Capturing a Still Image in the Video During
Playback
You can capture still images of the scenes you like in the recorded videos.
1
Open the LCD monitor.
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
0
the mode switching screen.
Tap A to switch the mode to video. (You can also use the A/B button
on this unit.)
2
Tap "<<PLAY" to select the playback mode.
≪PLAY
3
Tap on the desired video.
≪REC
4
Tap pause e at the desired scene during playback.
0:01:23
≪REC
After pausing the video, you can fine-tune the point to capture by
0
tapping forward slow-motion k and reverse slow-motion l.
5
Press the SNAPSHOT button.
Memo :
Still images are captured with a size of 1920×1080.
0
REC MENU
MENU
0:12:34
MENU
Capturing a Required Part in the Video
(TRIMMING)
Select the required part of a video and save it as a new video file.
The original video remains in its existing location.
0
1
Open the LCD monitor.
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
0
the mode switching screen.
Tap A to switch the mode to video. (You can also use the A/B button
on this unit.)
2
Tap "<<PLAY" to select the playback mode.
≪PLAY
3
Tap "MENU".
≪REC
4
Tap "TRIMMING".
VIDEO
TRIMMING
5
Tap the video to edit.
TRIMMING
6
Tap e to pause playback at the desired start point, then tap "A".
Editing
REC MENU
MENU
STOP
125