Table of Contents
Advertisement
Changing the Display Language
The language on the display can be changed.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
1
Press MENU.
2
Select "DISPLAY SETTINGS" and press OK.
Press UP/< or DOWN/> to move the cursor.
0
To cancel and return to the previous screen, press MENU.
0
3
Select "LANGUAGE" and press OK.
Press UP/< or DOWN/> to move the cursor.
0
To cancel and return to the previous screen, press MENU.
0
4
Select the desired language and press OK.
Press UP/< or DOWN/> to move the cursor.
0
To cancel and return to the previous screen, press MENU.
0
Holding this Unit
When holding this unit, keep your elbows close to your sides to prevent
camera shake.
Hold the LCD monitor with your left hand and adjust the angle accordingly.
0
Holding the LCD monitor with your left hand helps to stabilize the camera
for recording.
Caution :
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is used by children.
0
Memo :
If camera shake is excessive, use the image stabilizer.
0
"Reducing Camera Shake" (A p. 24)
Tripod Mounting
This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the same position.
To prevent this unit from falling off, check the tripod mounting screw holes
0
and positioning holes on the unit carefully before mounting, and turn the
screws until they are fastened firmly.
Caution :
To prevent injuries or damages which may result if this unit falls off, read
0
the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.
Memo :
It is recommended to use a tripod or monopod when recording in
0
conditions prone to camera shake (such as in dark places or when zoomed
to the telephoto end).
Set the image stabilizer to b (OFF) when using a tripod for recording.
0
Getting Started
11
Advertisement
Table of Contents
