1
1 speaker cable
connector
11 Disconnect the speaker cable connector from the system board.
12 Make note of the speaker cable routing.
13 Remove the speakers.
Replacing the Speaker
1 Replace the speakers and the speaker cables.
2 Connect the speaker cable connector to the system board.
3 Replace the two speaker screws (one on each speaker) that secure the
speakers to the computer base.
4 Connect the button board cable connector to the system board.
5 Replace the palm rest (see "Replacing the Palm Rest" on page 79).
6 Replace the display assembly (see "Replacing the Display Assembly" on
page 67).
86
Speaker
2 screw (2)
3 speaker cable
routing
2
3