Display Assembly; Removing The Display Assembly - Dell XPS M1530 Service Manual

Display Assembly

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.

Removing the Display Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the Hinge Covers and the Center Control Cover (see "Removing
the Hinge Covers and Center Control Cover" on page 45).
3 Turn the computer upside down and loosen the four captive screws along
with the M2.5 x 5-mm screw. Remove the memory module cover.
Product Information Guide
12
.
Display Assembly
63