Replacing the speaker
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Insert the rubber stubs on the speaker into the slots on the palm rest and
keyboard assembly and snap the speaker into place.
2
Route the coin-cell battery cable through the routing guide on the speaker.
3
Connect the speaker cable to the system board.
Post-requisites
1
Follow the step 4 procedure in
2
Replace the battery.
3
Follow the procedure from step 2 to step 5 in
computer. After working inside your computer, follow
After working inside your
"Replacing the I/O
computer. For more safety best
www.dell.com/
board".
"Replacing the base
Before
cover".
53