Palm Rest
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
Removing the Palm Rest
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove any installed ExpressCards from the ExpressCard slot.
3 Remove any installed memory modules or Mini Cards (see "Memory" on
page 17 and "Communication Cards" on page 35).
4 Remove the hinge covers and center control cover (see "Removing the
Hinge Covers and Center Control Cover" on page 45).
5 Remove the internal card with Bluetooth
"Removing the Card" on page 49).
6 Remove the keyboard (see "Removing the Keyboard" on page 55).
7 Remove the display assembly (see "Removing the Display Assembly" on
page 63).
8 Turn the computer upside down and remove the eleven M2.5 x 5-mm
screws from the computer base.
Product Information Guide
.
®
wireless technology (see
Palm Rest
14
75