1
2
1
display cable pull-tab
3
pull the Mini-Card antenna cables
out of the computer base through
here
12 Remove the display assembly from the computer base.
Replacing the Display Assembly
1 Replace the camera cable.
2 Reconnect the display cable to the connector on the system board.
3 Make note of the cable routing and carefully slide the Mini-Card antenna
cables through the system board and into their routing guides.
4 Replace the two M2.5 x 8-mm screws on each side of the display assembly.
5 Replace the keyboard (see "Replacing the Keyboard" on page 56).
3
2
camera cable connector
Display Assembly
67