Removing The Bluetooth Card; Replacing The Bluetooth Card - Dell Adamo XPS Service Manual

Back to Contents Page
Internal Module With Bluetooth Wireless Technology
Adamo XPS™ Service Manual
Removing the Bluetooth Card
Replacing the Bluetooth Card
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see
the computer.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
Removing the Bluetooth Card
1. Follow the instructions in Before You
2. Remove the computer battery (see
3. Open the display (see Opening the
4. Remove the palm rest assembly (see
5. Remove the screw that secures the Bluetooth™ card to the right daughter board.
6. Lift the Bluetooth card to disconnect it from the connector on the right daughter board.
7. Turn the Bluetooth card over.
8. Disconnect the blue antenna cable from the Bluetooth card.
1 screw 2 Bluetooth card
Replacing the Bluetooth Card
1. Follow the instructions in Before You
2. Connect the blue antenna cable to the Bluetooth card.
3. Turn the Bluetooth card over.
4. Align the connector on the Bluetooth card with the connector on the right daughter board, and press gently to connect the Bluetooth card to the right
daughter board.
Begin.
Removing the Computer Battery).
Display).
Removing the Palm Rest Assembly).
Begin.
Removing the Computer Battery) before working inside