Back to Contents Page
Memory Module
Adamo XPS™ Service Manual
Removing the Memory Module
Replacing the Memory Module
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
the computer.
NOTE:
The memory on your computer cannot be upgraded.
Removing the Memory Module
1. Follow the instructions in
Before You
2. Remove the computer battery (see
3. Open the display (see
Opening the
4. Remove the palm rest assembly (see
CAUTION:
To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
5. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.
6. Remove the memory module from the memory module connector.
1
memory module
3
memory module connector
Replacing the Memory Module
NOTE:
The memory on your computer cannot be upgraded.
1. Follow the instructions in
Before You
Begin.
Removing the Computer
Battery).
Display).
Removing the Palm Rest
Assembly).
2
securing clips (2)
Begin.
Removing the Computer
Battery) before working inside