Using External Audio/Video Players-Av-In - Kenwood DDX9016S Instruction Manual

OTHER EXTERNAL COMPONENTS
❏ Displaying the picture from the camera
The camera screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the operation buttons, touch the screen.
Touching the screen again displays the operation
buttons.
To display the picture from the camera manually
• When [Front Camera] is set to [ON], the picture
from the front view camera is displayed. When
[Front Camera] is set to [OFF], the picture from
the rear view camera is displayed.
On the touch panel:
Select [Camera] on the pop-up short-cut menu.
(Page 13)
On the monitor panel (only for DDX9016S/
DDX9016SM/DDX9016DABS):
To switch the screen between the front view
camera and the rear view camera
• Each time you touch the button, the screen is
switched between the rear view screen and the
front view screen.
To exit the camera screen
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 58.
❏ Starting playback
1
Connect an external component to
the AV-IN1 or AV-IN2 input terminal.
(Page 74)
2
Select "AV-IN1" or "AV-IN2" as the
source. (Page 12)
3
Turn on the connected component and
start playing the source.
ENGLISH 37